1/8 GT BMT 801GT EP RTR

BMT 801GT EP is a competition model in the RTR version that pleases both professionals and beginners drivers.

It’s supplied already pre-assembled to 99%, you only necessary to add the batteries to the radio control.

Chassis:

The chassis is in ergal 7075 of new generation, with Hard anodization.

It’s has already the front and rear reinforcements.

All the transmission of the model are cardan, at the front CVA homokinetic, the crowns and pinions of the differentials are made of steel and the whole turns on ball bearings.

The shock absorbers are hydraulic (with oil), are of the new Big Bore 17mm type and are completely in aluminum with a 4.0mm steel stem and adjustable by means of a ring nut to vary the spring hardness.

The shock absorber supports are in ergal 7075 from 4mm thick and have various holes for fixing the shock absorbers in order to change the attitude.

The suspensions are fully adjustable, with upper triangle, at the front, with adjustable position and rear tie rod. All angle are adjustable like camber, convergence, height etc.

In addition, the front and rear suspensions are equipped with adjustable anti-roll bars for maximum perfomances!

The whole electronic part is protected by an airtight dustproof box with extra battery box to balance the weight of the model.

The lexan body is supplied already painted, in the splendid white/blue racing livery.

The tires and rims are supplied in the kit, they are slick with medium compound that fit most of the track.

Engine and electronic regulator:

It’s Included all the electronics that are produced by HobbyWing. With 2000 KV electric motor and 100A regulator.

All electronics are Waterproof, and supports Lipo batteries, up to 4S.

All parameters can be set using the appropriate Program Card included.

Radio system:

The 3-channel radio remote control included, has 2.4ghz Specktrum technology, while the servo control is produced by Savox and is 14kg of torque, metal gears and waterproof.

Here are some features of this model:

99% RTR

2.4ghz radio remote control

HobbyWing Electronics

Servo control by Savox 14kg metal gears

Body included

3mm ergal frame

Suspension pins in steel

Electronics in an airtight box

ESC 100A

3 Geared differentials

17mm Big Bore shock absorbers

Front shock absorber support in 4mm ergal

Rear shock absorber support in 3mm ergal

Chassis reinforcements

Rear mud guards

Rear and front stabilizer bars

Adjustable steel tie rods

Adjustable metal shock absorbers

Program Card included

Technical data:

Scale: 1/8

Length: 460mm

Width: 306mm

Height: 140mm

Pitch: 322mm

Weight: 3600g

To complete the model car:

4 AA batteries

3S or 4S Lipo battery